CONTENTUM.COMA specialist. A plan. A result.

Vulnerabilities · 2026

CVE-2026-42081
Go vulnerability

### Summary The AMF in Free5GC v4.2.1 does not verify the UE Security Capabilities received in NGAP PathSwitchRequest messages against its locally stored values, as mandated by 3GPP TS 33.501 §6.7.3.1. A malicious gNB can overwrite the AMF's stored UE security capabilities with arbitrary values, which are then propagated in PathSwitchRequest Acknowledge messages and subsequent Handover Request messages. This leads to persistent handover denial-of-service for affected UEs. ### Details **Affected File:** `amf/internal/ngap/handler.go` — `handlePathSwitchRequestMain` function **Root Cause:** When the AMF receives a PathSwitchRequest during an Xn-handover, it processes the UESecurityCapabilities IE by directly overwriting the stored values without comparing them to the previously stored capabilities: ```go if uESecurityCapabilities != nil { amfUe.UESecurityCapability.SetEA1_128_5G(uESecurityCapabilities.NRencryptionAlgorithms.Value.Bytes[0] & 0x80) amfUe.UESecurityCapability.SetEA2_128_5G(uESecurityCapabilities.NRencryptionAlgorithms.Value.Bytes[0] & 0x40) amfUe.UESecurityCapability.SetEA3_128_5G(uESecurityCapabilities.NRencryptionAlgorithms.Value.Bytes[0] & 0x20) amfUe.UESecurityCapability.SetIA1_128_5G(uESecurityCapabilities.NRintegrityProtectionAlgorithms.Value.Bytes[0] & 0x80) amfUe.UESecurityCapability.SetIA2_128_5G(uESecurityCapabilities.NRintegrityProtectionAlgorithms.Value.Bytes[0] & 0x40) amfUe.UESecurityCapability.SetIA3_128_5G(uESecurityCapabilities.NRintegrityProtectionAlgorithms.Value.Bytes[0] & 0x20) } ``` **3GPP TS 33.501 §6.7.3.1 requires three actions, none of which are implemented:** 1. **Verification (SHALL):** "The AMF shall verify that the UE's 5G security capabilities received from the target gNB/ng-eNB are the same as the UE's 5G security capabilities that the AMF has locally stored." → Not implemented. The AMF unconditionally overwrites stored values. 2. **Correction (SHALL):** "If there is a mismatch, the AMF shall send its locally stored 5G security capabilities of the UE to the target gNB/ng-eNB in the Path-Switch Acknowledge message." → Not implemented. The PathSwitchRequestAcknowledge contains the corrupted values. 3. **Logging (SHALL):** "The AMF shall support logging capabilities for this event and may take additional measures, such as raising an alarm." → Not implemented. No mismatch detection or logging exists. **Propagation:** The corrupted values are propagated in: - **PathSwitchRequestAcknowledge:** Contains corrupted UESecurityCapabilities (demonstrated in pcap) - **Subsequent HandoverRequest messages:** AMF sends corrupted capabilities to target gNBs Per TS 38.413 §8.4.2.4, if the supported algorithms in the UE Security Capabilities do not match any allowed algorithms configured in the target gNB, the target gNB is required to reject the procedure using a HANDOVER FAILURE message. ### PoC **Environment:** - Free5GC v4.2.1 AMF (Docker container) with full NF stack (NRF, AUSF, UDM, UDR, NSSF, PCF, SMF, UPF) - UERANSIM v3.2.7 gNB with custom inspection-tool extension - tshark for packet capture **Reproduction Steps:** 1. Start Free5GC full stack and register a UE through a gNB (NG Setup → Registration → PDU Session Setup). 2. Send a normal HandoverRequired from the gNB. Capture the resulting HandoverRequest from the AMF and confirm `nRintegrityProtectionAlgorithms = 0xe000` (NIA1, NIA2, NIA3 all supported). This is the baseline. 3. Send a PathSwitchRequest with `nRintegrityProtectionAlgorithms = 0x0000` (all integrity algorithms set to not supported). The AMF responds with PathSwitchRequestAcknowledge. 4. Observe that the PathSwitchRequestAcknowledge contains `nRintegrityProtectionAlgorithms = 0x0000` — the corrupted values are propagated back. **Observed Result (from pcap capture):** | Packet | Message | nRintegrityProtectionAlgorithms | |--------|---------|-------------------------------| | #20 | HandoverRequest (AMF→gNB) | `0xe000` (NIA1 ✓ NIA2 ✓ NIA3 ✓) — **baseline** | | #30 | PathSwitchRequ

Affected products

Go. The exact versions are in the references.

What to do now

  • Check your exposureFind out whether Go runs anywhere in your environment, including systems of suppliers.
  • UpdateInstall the version in which the vendor fixed the vulnerability. The references lead to the advisory.
  • Set the orderSystems that can be reached from the internet come first, then the rest.

References

Data: CVE list and the NVD. This product uses data from the NVD API but is not endorsed or certified by the NVD.